Back to Training

Repairs & Diagnostic

0% Complete
0/0 Steps
  1. Testing Outlet Pressure
  2. Replacing A Standard Door Switch
  3. Testing Gas Inlet Pressure - Natural Gas
  4. Testing Electronic Gas Valve
  5. Gas Flex Replacement
  6. Universal Condenser Fan Motor Replacement
  7. Pump Down Of Compressor
  8. Basic AC Wiring
  9. Using The Motor Puller Tool - Blower Wheel
  10. Cleaning The Flame Sensor
  11. Installing A Primary Drain Line
  12. Installing A 24V Transformer
  13. Installing A Safety Drain Switch
  14. Basic Digital Thermostat Install
  15. Installing A Condensate Pump
  16. Contactor
  17. Testing Blade Fuses
  18. Compressor Saver Kit Install
  19. Flame Sensor Replacement
  20. Hot Surface Ignitor Replacement
  21. Schrader Valve Core Replacement
  22. Insulated Terminal Protector
  23. Primary Drain Flush
  24. Calculating Subcool
  25. Basic Furnace Wiring
  26. Anti-Vibration Pads On Outdoor Systems
  27. (REPAIR) Leveling The Condenser
  28. (DIAG) Testing Furnace Door Switches
  29. (DIAG) Testing Limit Switches
  30. (DIAG) Lil Popper
Repairs & Diagnostic Testing Blade Fuses
Video 17 of 30
In Progress

Testing Blade Fuses

Blade fuses are found on many different types of control board and relays.